Welcome to RAW Works. My name is Raymond and I live in the western suburbs of Sydney. This blog will be a portal for me to photo-document the wheels I refurbish and repaint. This is only a side hobby for me so there won't be any crazy custom jobs! My skills have only stretched so far as to using body repair materials, resprays and polishing, so anything that requires welding and unbuckling will be beyond what I can do. I hope to improve on my current skills as I go along, and as a lover of wheels, it's a way for me to express my art side as well as giving life to some tired wheels again.

At the moment, I'm just scouring through eBay for damaged wheels selling for cheap. If you have any wheels you don't need anymore, throw me an email/comment. At the moment I'm just buying sets of wheels to refurb then sell them off. I prefer not to do personal jobs/requests as I don't trust myself with that yet! But that said, pass me an email/comment if you need any help wheel-wise.

My Facebook page is @ http://www.facebook.com/raysalloywheelworks/, please "like" it!

Cheers.

Sep 26, 2009

Feedback from customer

I sold off those Boss 5 spokes via eBay a while back (late June) and had received feedback from the guy that I didn't post up here. Anyway, this is what he said:
G'day Raymond,

i've just received the rims and all is good. I'm very happy with the condition they're in and although i haven't fitted them to my car (95 civic) yet, they look great next to it. Thankyou for your prompt responses and for making my first ebay experience smooth and stress free.

Yours Sincerely

Justin C
His comment made my day!

So anyway, lack of updates are due to working on my Mk3 Golf. Still working on it, and hoping to finish before mid-November comes (DOVW in Melbourne and rego is due). However, I've two wheel projects that I've started - the aforementioned 17" 2-piece BBS RS702, and also a mate's (probably soon to be mine?) 16" Volk CVs. Stashed away is a set of stock Mk3 VR6 stock BBS wheels, generic 7-spoke 16" wheels, 16" Alpina replicas I'm picking up soon and a single BBS RS wheel (for shits and giggles). Next update may be during X'mas time.

May 28, 2009

Boss 5 spokes

Photobucket

These were my sister's old wheels. Some bad gutter rashes as well as air impact damage. Some deep scratches here and there too. Also some ghastly stains probably caused by baked on CV grease. Those stains are starting to appear on her new wheels too; I think I'll have to check out the condition of the CV boots on her car soon! Baked on brake dust as well but they're very tame compared to those grease marks. Centre-caps were pretty oxidated too - broke them while taking them off (it's like the tabs were potato chips) so they'll be gone after the refurbish.

Before pics:

IMG_3260.JPG

Baked on grease:
IMG_3261.JPG

Baked on brake dust and light gutter rash (some heavy gashes in other sections as well):
IMG_3262.JPG

Grease spots and air impact damage:
IMG_3263.JPG
Prep:
Sanded back to metal on damaged areas:
IMG_3785.JPG

Used fibreglass filler for metal to repair the gashes and scrapes:
IMG_3786.JPG

IMG_3787.JPG

Got a bit excited around the edge though:
IMG_3789.JPG

60/120/240 grit dry sanding to level out filler:
IMG_3793.JPG

IMG_3796.JPG

IMG_3797.JPG

IMG_3799.JPG

IMG_3800.JPG

Ready for primer:
IMG_3801.JPG

Etch primer (Concept Paints) mixed with thinner in 5:1 ratio. Came out of the gun clean:
IMG_3816.JPG

240 grit dry sand followed by spray putty (Concept Paints; same mixing ratio) over unlevel sections and scratches, followed by 240 grit dry sand again:
IMG_4520.JPG

IMG_4524.JPG

Primer again. Gun was exhibiting a spitting pattern but that was due to not oiling the spray gun components (I know better now):

IMG_4533.JPG

Some imperfections that will show up after the top coat. Due to not enough filler in some sections, and a few accidental chips while moving the wheels around:

IMG_4526.JPG

IMG_4527.JPG

IMG_4528.JPG

IMG_4532.JPG
Paint & Polish:
Used wheel silver (Concept Paints). Their other acrylic products are not mixed and assuming it was the same for the wheel silver, I used a 1:1 mixing ratio. Paint came out as viscous as thinner but I went ahead to spray anyway. First pair I painted:
IMG_4553.JPG

IMG_4555.JPG

IMG_4566.JPG

There were lots of air bubbles in the pot. Paint was extremely runny. Silver particles did not seem to mix in very well, gotta make note to mix very thoroughly before shooting it.

High sections came out bad. Hard to see in the following photo though, but there's some light streaks:

IMG_4554.JPG

Worst section of the first pair. Two possible culprits - inadequate sanding in this section of the primer, or maybe caused due to runny paint? Looks a little like orange peel:
IMG_4560.JPG

Best outcome of the first pair:
IMG_4561.JPG

There were also small blobs (specks) of paint that landed on the surface. Didn't take pics of them but they could be seen in the overview pics.

For the last two, I used a 5:1 mixing ratio. The orange peel effect is even more apparent with these two. However, paint did come out less runny and there were less specks of paint. To be honest, the last two came out much worse than the first two. I'm pretty shocked. I guess I'll try a 2:1 mixing ratio next...
IMG_4589.JPG

IMG_4590.JPG
After:
Had let the paint to dry for 3+ days. Used polishing compound, followed by ScratchX then finally WheelWax. Not much difference:
IMG_4669.JPG

IMG_4668.JPG

You can easily see the difference between the two pairs. The smooth finish was achieved using 1:1 mixing ratio, and the rough finish was due to the 5:1 mixing ratio. Polishing has removed the specks mentioned before when using 1:1 mixing ratio, but the roughness of the last two couldn't be polished out. Texture is smooth for both though.

From far away, the only tell-tale sign that they have different finishes is that the rough-looking pair have a more satin finish, whereas the smooth-looking pair have a glossy finish

IMG_4664.JPG

IMG_4659.JPG

... and ...

IMG_4663.JPG

versus...

IMG_4662.JPG

Can you tell the difference?
All photos @ my Photobucket.

Next up I'll be polishing the lips of my BBS RSII.